Advanced Auto Parts

Torque spec comes into play after a fastener has been chosen. Bolt torquing is very important. When you thread and tighten a bolt the melt stretches a little, but the metal doesn?t want to be stretched so it resists the stretches and this is where you get the holding power from. This is why when you over tighten it can?t hold the load because it can?t return to its normal shape. Further to this in time the bolt continues to stretch and will end up snapping.

Torque-to-Yield Bolts

A torque to yield fastener is a one-time use that is based on this torque principal we just talked about. The torque spec usually have a 25% safety feature giving you a 25 per cent over tightening leniency. The torque to yield bolts don?t have this safety buffer. They are not meant to stretch the metal. This may sound like a disadvantage but it?s not really. They are extremely strong as they afford the whole 100% of their strength whereas the basic bolt only gives you about 75%.The one disadvantage they do have though is they can only be used once. So if you remove them you have to replace them with a TTY (torque to yield) bold. You are going to end up with 25% less strength with the basic fastener.

The TTY are used in many cases so it?s important for the technician to be aware of this during the estimation process of the procedure.

Tightening Sequence A tightening sequence can also be specified in conjunction with torque specs. A crises cross pattern is use to install wheels and now some installation patterns are being suggested for body panel fasteners. There is a certain amount of expanding and contracting during temperature fluctuations with composite panels. This means the fasteners have to adjust to these changes and must be designed to allow for this.

Shop Tips Whenever possible replace the fastener with the same type as the one your remove. Check the manual however to ensure it is the correct part and you are doing the proper procedure. Every part is specific because there is a reason for it.

Keeping track of what you are removing is important and time saving so tossing them in a pile is not the answer. Just use some small plastic bags, put them in and then mark what they are on the outside of the bag.

If you do not have a manual, you can ask a dealership to show you their service manual.

Use all the parts that come with your replacement parts.

If you are not sure about the label, compare height, thread pitch and diameter to the new piece and this will help you choose the right replacement fastener.

Make sure to use coated materials to prevent corrosion. A classic example of making this mistake is using a non-coated steel boat with an aluminum panel. If the coated items you require are not available then use a plastic or fiber gasket, a washer or even a layer of paint to produce a barrier between the materials.

Filed under: Cars and Trucks | No Comments »

You may want to consider renting a vehicle if you are planning on taking a holiday or if you need to travel often for your business.

You will find a lot of car rental companies out there nowadays and Enterprize Rent A Car is one of them. This company has a very solid reputation.

It is not so difficult to rent a car. There are a lot of options when it comes to renting a car. A lot of car rental companies will offer some following choices:

Subcompact: A lot of subcompact cars are almost the same to Chevrolet Aveo, they can be two doors or four doors.

Most often they will have an AM/FM radio, but no CD player. They can fit up to 4 adults and one large suite case.

Compact: Compact cars are almost the same to the Chevrolet Cobalt; they can comfortably seat five adults with room for a big suitcase in the trunk.

Most compact cars are a bit of an upgrade from subcompacts, because they offer additional options such as cruise control.

Intermediate: The intermediate car that enterprize rent a car offers is similar to a Pontiac G5 or Toyota Carola. Intermediate cars can be 2 doors or 4.

Intermediate cars offer a very good amount of space while keeping a budget in mind. It can easily seat 5 adults with a lot of space for one large as well as two small suitcases.

Standard: The standard is almost the same to the Ford Fusion. The standard has offers the same options as the intermediate cars, only with a little bit more trunk space.

Full: At Enterprize Rent A Car the full size is similar to a Dodge Charger. Business men and women find that this class works well for them.

They can easily fit their whole luggage and any passengers that they may have into a full size. Besides that, the full size comes with a mp3 cd player as well as cruise control.

Luxury: A luxury car is a car that is similar to the Lincoln Town car or a Cadillac. Luxury cars are loaded with options and have just about everything you would need. Most will seat 5 adults very comfortably with plenty of trunk space.

There are also many different SUV and minivan options for the family travelers. It is important to keep you budget in mind as well when renting a car from a company such as Enterprize rent a car.

Remember that renting a compact car can save you a lot of money compared to renting a full sized or luxury car.

Filed under: Cars and Trucks | No Comments »

Travel insurance is as important as buying your tickets for going abroad. You may even consider it as mandatory as taking a passport and visa. Many cases have occurred in the past where the travel medical insurance coverage has been a boon to people during emergencies.

One such case was a non-resident individual who had purchased a medical insurance policy for his parents visiting USA. Incidentally, his father had a heart attack during his short stay and it cost a lot to treat him. The fact that his father had been covered by insurance was a huge relief. Otherwise, this would have only unnecessarily added to the mental trauma that already the family was going through. The final bill crossed above one lakh dollars but since the victim was covered by the insurance company, the bills were directly sent to the insurance provider for payment. The cost of prescription drugs was initially paid by the individual but later, he filed the claims with the necessary documents and got the reimbursement at a later date. This is one such classic experience which highlights the importance of covering oneself with a travel insurance plan while going abroad.

Insurance providers are available 24X7 throughout the year to help you. Testimonials reinforce this fact as many cases have been documented when the insurance company provided timely assistance during critical emergencies like baggage loss, illnesses, prescription drug charges, surgeries, doctor consultation and evacuation expenses.

When customers have advanced their trip to their native land due to unforeseen circumstances, claims have been paid for the expensive trip cancellation charges.

Travellers have also been benefited by their travel insurance plan coverage plan while they take up adventurous sports like mountaineering and skiing. Injuries, tears, fractures are quite common in these cases and treating them would be quite expensive in case you are not covered suitably by an insurance policy.

There are documents required by the insurance providers for processing your claims. The most common proofs are insurance plan number, booking or reservation slip, age proof, travel agent number, travel dates and tickets.

In addition, depending on the purpose of the claim, you need to present some additional proofs while submitting your claim form.

Invoices, tickets, bills and other travel document proofs need to be stored safely in case it may serve as a proof while claiming any expenses from the insurance provider at a later date.

Filed under: Insurance | No Comments »

One thing is for sure if you are going to be a paint technician then how good you are at it will all depend on how well you learn to operate your spray guns. They are the tools of the trade and can mean the difference in your being an excellent paint technician or a poor one. Not only must one learn the various techniques involved with the spray guns there is also a must have knowledge to be gained in how to maintain the spray guns to keep them in their optimum working condition. You can have all the techniques mastered but if your gun is not operating properly then in won?t matter about your techniques.

You have to visualize what the spray gun is doing when in operation such as taking tiny droplets of paints then breaking these droplets down into thousands of small particles. What gives the spray gun its ability to do this is its nozzle set. This is the air cap, paint needle and the fluid tip. There are variables that determine the size of those thousands of droplets of paint. It will depend on the viscosity of the streams of fluid as well as how much surface tension is present. The reason you don?t get a steady stream of paint running out is because of the compressed air at the nozzle.

Getting on to the techniques of the gun when you slightly apply pressure to the trigger the air valve opens. With a little more pressure, it opens the fluid tip needle and allows the paint to flow.

If you are using a gravity gun. The amount of fluid dispersed is controlled by the viscosity of the paint. The flow is also determined by the fluid tip as well as the needle adjustment. As a rule of thumb, the gun should be almost fully open. With pressurized fluids, air pressure also affects the flow.

Equipment Set Up Knowing how to work with atomization is the key to the proper set up. The combinations of the variants must be just right. For example the exact blend of the right nozzle with the correct pressure settings combined with fluid flow and fan width all the way they are suppose to be determines the outcome. Ideally, for the standard guns try and use only enough pressure to give you the best atomization and spray pattern.

If you are new to the world of spray painting the best advice in the beginning is keep it simple. In other words, use a type of spray gun that is going to do the job you need it for. There is no need to purchase a spray gun that has a lot of additives to it if you don?t require them. On the other hand, if you are going to be using your spray gun on a regular basics then you may want something a little more advanced, as you will likely need it as you venture into your paint jobs.

Filed under: Cars and Trucks | No Comments »